D01 Automatic Series D

Crown: 20 mm
Leg: 11 mm
Load capacity
10 x 5000 pcs.

D01 Stapling Machine with 10 Stapling Heads A 20.
Fastening Alu-Sheets onto a Plastic Base.
SGR 10/A 20-42.

Application range

Varying aluminium sheets with a plastic base part on top will be put into adequate empty spaces of an extendible support table.
At the touch of a button the support table moves into the machine with 10 stapling heads and consolidates all parts with up to 10 staples. The stapling device recognizes automatically which stapling heads are to be activated. Stapling operations which are not necessary will not be released. The support table will then be extended again and the consolidated part can be taken out. 
Capacity 12 – 15 Sec./ part (without handling).
1,5 part / min. and 4 sheets.

Technical Description

•  10 Stapling heads A 20 - 42.
•  Loading capacity of 1 stapling head: 5000 coiled staples.
•  Coiled staples M A 42 SS.
•  Reloading time for 1 coil: less than 1 minute. 
•  Frame with safety doors.
•  Safety glasses.
•  Moveable table for product.
•  Control with OP 17 and operater panel. 
•  Light curtain for safety.
•  Equipped with 20 l pressure tank to compensate pressure fluctations. 

See Stapling Heads for coiled staples > A 20.
See also Automatic Stapling Machines > D01-D09, as well as
Stapling Device with arm > SGR 1 / QE / A 20 - 42 / VT.
415 V/50 Hz
6 bars
Air consumption per stapling at 6 bar
70 Ltr.NL/min
Device dimensions (L x W x H)
4245 x 1470 x 1710 mm
Noise pressure level
< 70 db
Stapling head
10 x A 20 - 42
Load capacity
10 x 5000 pcs.
Stapling head reloading
within 1 minute
D01 Stapling Machine SGR 10/A 20-42 with 10 Stapling Heads. Fastening Alu-Sheets onto a Plastic Base.
Stapling Head for coiled staples (20 mm crown, 1.5 mm wire). For stationary use in stapling devices and special purpose machines for stapling and nailing all kind of materials.
Staple Remover MORI.
To remove larger staples from cardboard boxes.

M A 42 S

for stapling head A 20 - 42
A = crown:
20,00 mm
5.000 pcs.
B = leg:
11,00 mm
40.000 pcs.
C = wire:
1,50 mm
stainless steel